Product Description
This is a pre-terminated Cat6A U/FTP patch cable, built for Gigabit and 10 Gigabit Ethernet runs between switches, patch panels, NVRs and network devices. For CCTV and IT installers spec'ing structured cabling, the shielding and jacket type matter as much as the category rating.
Why U/FTP here
Each twisted pair carries its own foil screen, cutting crosstalk and electromagnetic interference between adjacent pairs. That's the practical benefit in comms rooms, equipment racks and containment runs where several data cables lie bundled together — a common scenario when patching multiple NVRs, PoE switches and access points in the same cabinet.
LSFH jacket — where it's specified
The Low Smoke Free Halogen outer sheath is intended for commercial buildings and public spaces where fire regulations call for reduced smoke and no halogen gas release if the cable is ever exposed to fire. Worth checking against the building's fire safety spec before ordering in bulk for an office fit-out or communal residential block.
Fitting it into a job
- Pre-terminated RJ45 connectors at both ends — no field termination needed, so it drops straight into patch panel-to-switch, switch-to-NVR or device-to-wall-outlet runs
- Supports Gigabit and 10 Gigabit Ethernet, covering most current PoE camera and network video deployments
- White jacket for jobs where cable colour needs to match a structured cabling scheme in an office or server room
Pairs naturally with PoE switches and NVRs on any IP CCTV or general network installation where rack tidiness and fire-rated cabling both matter.
Specifications
- Cable Category
- CAT6A
- Colour
- White
- Connector Type
- RJ45
Frequently Asked Questions
What is this Cat6A cable suitable for?
It's rated for high-speed Ethernet, including Gigabit and 10 Gigabit Ethernet, and is commonly used between switches, patch panels, NVRs and other network devices.
Why does it use U/FTP shielding?
Each twisted pair has its own foil screen, which reduces electromagnetic interference and crosstalk when several network cables run close together, such as in racks or containment.
What does the LSFH jacket mean for installation?
LSFH stands for Low Smoke Free Halogen, a jacket type used in commercial buildings and public spaces where fire regulations require reduced smoke and no halogen gas on combustion.
Does it need terminating on site?
No — it comes with pre-terminated RJ45 connectors at both ends, so it connects directly between devices without field termination.
