Product Description
A 15m CAT6 patch lead sized for the runs a standard 3m or 5m lead won't cover — camera-to-switch across a warehouse, NVR-to-router through a loft void, or rack-to-wall-plate in an office fit-out.
Key specs
- CAT6 rated at 650 MHz, wired to TIA/EIA-568-B.1-2001 T568B
- 4-pair UTP, 24 AWG stranded copper conductors
- Gold-plated RJ-45 connectors, snagless boots at both ends
- PVC (CMG) jacket — general purpose fire rating
- 15m length, white finish
- Supplied as one fixed lead, ETL verified
Where it fits
Length matters more than most specs when planning a run: 15m covers most single-camera drops from a loft or riser cupboard to an NVR, or a switch-to-patch-panel link in a small comms room, without needing a coupler joint partway along.
Selection notes
Stranded copper (rather than solid-core) is the right choice for a patch lead — it flexes around rack ears and camera housings rather than a fixed in-wall run. The snagless boot protects the retaining clip when the cable gets pulled through conduit or trunking during installation.
White finish suits ceiling-run or office environments where the cable sits in view alongside existing structured cabling.
Specifications
- Cable Category
- CAT6
- Length
- 15m
- Colour
- White
- Connector Type
- RJ45
Frequently Asked Questions
What cable rating is this?
It's CAT6, rated at 650 MHz, which supports Gigabit Ethernet speeds and IP camera or PoE traffic.
What wiring standard is it terminated to?
TIA/EIA-568-B.1-2001 T568B, matching standard UK network and CCTV installs.
Is this a fixed lead or does it need terminating on site?
It's a ready-made fixed cable with RJ-45 connectors moulded at both ends — no field termination needed.
What's the conductor type?
4-pair UTP, 24 AWG stranded copper, which suits routing round racks and camera housings rather than a fixed in-wall run.
