Product Description
A 2m Cat6 U/UTP patch lead for the short, fixed runs inside a cabinet or at the camera end of an install — switch to NVR, PoE injector to camera drop, or router to wall plate.
Where this length fits
On CCTV jobs the 2m length suits equipment that's already close together: an NVR sitting next to its router, a switch patching straight down into a cabinet, or a short jump from a wall socket to a desktop unit. Keeping the lead length matched to the actual gap avoids loops of slack that snag underfoot or clutter a rack.
Key specs
- Type: Cat.6, U/UTP (unshielded twisted pair) — no shielding, so route away from heavy electrical cable runs
- Bandwidth: 250MHz, with nominal attenuation of 32.8dB per 100m at 250MHz
- Conductor: copper, 24AWG
- Connectors: RJ45 male to RJ45 male, gold-plated pins, copper alloy construction, polycarbonate housing
- Jacket: PVC, 5.8mm diameter, white
- Minimum bend radius: 69mm — tighter curves risk signal loss
- Operating range: -10°C to 60°C, suiting most indoor cabinets, comms rooms and internal riser cupboards
- Storage range: -20°C to 75°C
Because it's unshielded, keep this lead clear of mains cabling and other interference sources when specifying a run for a CCTV cabinet or comms cupboard.
Specifications
- Cable Category
- CAT6
- Length
- 2m
- Colour
- White
- Connector Type
- RJ45
- Material
- Polycarbonate
Frequently Asked Questions
Is this cable shielded?
No — it's U/UTP (unshielded twisted pair), so it's best kept away from heavy electrical interference sources.
What bandwidth does it support?
250MHz, with a nominal loss of 32.8dB per 100m at that frequency.
How tight can I bend it?
The minimum bend radius is 69mm; forcing a tighter curve risks signal loss.
What gauge is the conductor?
24AWG copper.
