Product Description
RJ45-NETWORK-CABLE-CAT6-15M-BLU: a 15m Cat6 run for camera and network drops
RJ45-NETWORK-CABLE-CAT6-15M-BLU is a fixed 15m Cat6 U/UTP patch cable with gold-plated copper alloy pins on both RJ45 male connectors. It's built for runs where a standard 1–5m patch lead won't reach — switch-to-camera drops across a room, NVR-to-wall-point links, or connecting equipment racks to outlying office points.
Key specs
- Length: 15m (49.21ft)
- Category: Cat.6, U/UTP (unshielded twisted pair)
- Bandwidth: 250MHz, with nominal attenuation of 32.8dB/100m @250MHz
- Conductor: 24AWG copper, PVC jacket (5.8mm diameter)
- Connectors: RJ45 male, polycarbonate housing, gold-plated copper alloy pins
- Minimum bend radius: 69mm
- Operating range: Operates between -10°C and 60°C; can be stored at temperatures from -20°C to 75°C.
The U/UTP construction keeps the cable slim and flexible for containment and trunking, though as an unshielded design it's best suited to installations away from heavy electrical interference. The 69mm minimum bend radius is worth noting on site — tight corners around trunking or cabinets should respect this to avoid signal loss.
For CCTV projects, this length suits camera positions set back from the nearest data point — porches, gable ends, or warehouse bays — without needing a coupler joint. Blue jacketing helps installers separate network runs from other cabling colours during multi-cable pulls, useful on larger commercial or residential-block jobs where cable identification speeds up fault-finding later.
Specifications
- Cable Category
- CAT6
- Length
- 15m
- Connector Type
- RJ45
Technical Specifications
Frequently Asked Questions
What length is RJ45-NETWORK-CABLE-CAT6-15M-BLU?
It is a fixed 15m (49.21ft) run, terminated with RJ45 male connectors at both ends.
Is RJ45-NETWORK-CABLE-CAT6-15M-BLU shielded?
No, it uses U/UTP (unshielded twisted pair) construction, which keeps the cable slim but offers no shielding against electrical interference.
What bandwidth does this cable support?
It's rated to Cat.6 standard, supporting 250MHz bandwidth with nominal attenuation of 32.8dB/100m at 250MHz.
How tight can this cable be bent before it's damaged?
The minimum bend radius is 69mm (2.72in), which should be respected when routing through trunking or tight corners.











