Cat6 Ethernet Cable - High-Speed RJ45 Network Patch Lead (1m)

RJ45-NETWORK-CABLE-CAT6-1M-BLUE is a 1m Cat6 U/UTP patch lead built for short, tidy runs between a switch and a nearby IP camera, NVR, or PoE injector. On multi-camera installs it's the lead that keeps a rack or cabinet free of slack, rather than the long haul back to site.

Where it fits

• Patching a camera or NVR into a nearby switch port inside a cabinet or wall box
• Linking a PoE injector to a device where the run is already short
• Office and retail back-of-house connections where cable tidiness matters as much as function

Key specs

• Type: Cat.6, U/UTP (unshielded twisted pair), 24AWG copper conductors
• Bandwidth: 250MHz, with nominal attenuation of 32.8dB/100m @250MHz
• Connectors: Male RJ45 to male RJ45 with a polycarbonate shell and gold-plated copper alloy contacts.
• Jacket: PVC, 5.8mm diameter, blue
• Minimum bend radius: 69mm
• Operating range: Operates between -10°C and 60°C; can be stored at temperatures from -20°C to 75°C.

Being unshielded, it suits typical indoor cabinet and containment runs rather than locations with heavy electromagnetic interference. The 1m length is intentional — it's a patching lead, not a run cable, so specify longer lengths separately for camera-to-switch distances beyond a cabinet.

Check the minimum bend radius before routing through tight gland plates or trunking corners, as tighter bends than 69mm risk affecting signal performance.