Product Description
This 2m HDMI cable is built for one job: getting a 4K NVR output onto a control room monitor without signal loss. It runs HDMI 2.0 Premium High Speed certified, supporting 4K@60Hz (3840x2160) at 4:4:4 chroma with 18Gbps bandwidth and HDR.
Two metres covers the typical rack-to-monitor or rack-to-desk distance without needing a booster or extender. That matters when the run sits inside a cabinet alongside PoE injectors, Ethernet switches and CCTV power supplies — sources of EMI that can degrade a lesser cable.
Key specs
- Uses 28AWG OFC copper conductors with triple shielding (foil plus braid) and gold-plated contacts to resist EMI.
- PVC jacket, 6–7mm OD — flexible enough to route through cable trays alongside DC pigtails, Cat6 and rack PDUs
- ARC, CEC, HDCP 2.2 and Ethernet channel supported, for AV receiver integration and IP control
- Backward compatible with HDMI 1.4
- Moulded strain relief rated 10,000+ cycles
- RoHS compliant
Suits NVR-to-monitor links in control rooms, video wall feeds and multi-channel mosaic displays where repeated reconnection during incident review is routine. Fits alongside structured cabling and rack-mounted power distribution as part of a scalable install — no adapters needed for standard HDMI Type A connections.
Specifications
- Product Type
- 4K High Speed HDMI Cable
- Connector Type A
- HDMI Type A Male (19-pin)
- Connector Type B
- HDMI Type A Male (19-pin)
- Cable Length
- 2
- HDMI Version
- 2.0 Premium High Speed
- Max Resolution
- 4K (3840x2160) @60Hz
- Bandwidth
- 18 Gbps
- Shielding
- Triple (Foil + Braid)
- Conductor Material
- Oxygen-Free Copper (OFC)
- Wire Gauge
- 28 AWG
- Jacket Material
- PVC
- Contacts
- Gold-plated
- Supported Features
- ARC, CEC, HDCP 2.2, Ethernet, HDR
- Colour
- Black
Technical Specifications
Frequently Asked Questions
Which resolution and refresh rate can this cable handle?
It's HDMI 2.0 Premium High Speed certified, supporting 4K@60Hz (3840x2160) at 4:4:4 chroma with 18Gbps bandwidth and HDR.
Is it suitable for a rack-to-monitor run in a control room?
Yes — the 2m length is designed for rack-to-monitor NVR connections, with triple shielding to resist EMI from nearby PoE injectors and Ethernet switches.
Will it work with older HDMI equipment?
Yes, it's backward compatible with HDMI 1.4.
Does it support ARC and CEC for AV receiver setups?
Yes, it supports ARC, CEC, HDCP 2.2 and an Ethernet channel for AV receiver integration and IP control.
