Product Description
IPBOX White IP65 Junction Box, 400×280×105mm — what it's for
This enclosure gives you a weatherproof, wall-fixed housing for terminations and low-voltage kit on external CCTV or network runs. It's ABS plastic, rated IP65, and sized 400mm × 280mm × 105mm externally.
Where it fits on a job
On multi-camera installs, a junction box like this sits mid-run between the head-end and the cameras — somewhere to land cable joints, PoE splitters, baluns or terminal blocks properly instead of taping a joint inside trunking. Typical placements: building exteriors, plant rooms, car parks and other exposed areas where a bare connection wouldn't survive.
Key specs
- External dimensions: 400 × 280 × 105mm
- Material: ABS plastic
- Ingress rating: Rated IP65, meaning it is dust-tight and resists low-pressure water jets.
- Mounting: wall-fix, integrated fixing points
- Cable entry: smooth-wall construction, drill on site for glands or conduit
Selecting the right box for the job
The 105mm depth is worth checking against whatever you're housing — a couple of terminal blocks and a PoE splitter will sit comfortably, but tot up your components before assuming everything fits. Cable entries aren't pre-cut, so plan gland or conduit positions before drilling, and match gland ratings to keep the IP65 seal intact once fitted.
Commonly specified alongside CCTV camera runs, network cabinet extensions, and general electrical control wiring where an organised, sealed mid-run connection point is needed.
Specifications
- IP Rating
- IP65
- Dimensions
- 400 × 280 × 105 mm
- Material
- ABS
- Colour
- White
Frequently Asked Questions
What size is the IPBOX White junction box?
External dimensions are 400mm wide × 280mm high × 105mm deep.
Is this box suitable for outdoor use?
Yes — it's rated IP65, giving dust-tight protection and resistance to low-pressure water jets, suitable for building exteriors, plant rooms and car parks.
Does it come with cable entry holes already cut?
No, the enclosure has a smooth ABS surface so installers drill their own entry points for cable glands, conduit or trunking to suit the job.
What equipment can it house?
The internal space suits terminal blocks, PoE splitters, CCTV baluns and small power distribution modules, though it's worth checking your component sizes against the 105mm depth before fitting.
