Product Description
A grey PVC adaptable enclosure for joining or breaking out cable runs on a CCTV installation. Use it wherever a power or data cable needs a sealed splice point outdoors or in a damp plant room.
Key specs
- Dimensions: 170 x 120 x 50mm
- Material: grey PVC
- Rating: stated as IP65 in the main listing (the page elsewhere also refers to it as "IP55" — confirm which figure applies before you rely on it for spec sheets or handover documents)
- Use: indoor or outdoor
- Colour: grey
Where it fits on a job
On retail, warehouse, office and residential-block installs, this box works as a mid-run junction — somewhere to extend a camera feed cable, join power leads, or break a long run into manageable sections without leaving connections exposed. It suits external wall runs feeding a camera or bracket, or cable entering a building where the splice needs to sit outside the DVR/NVR cabinet.
Selection note
Because the listing gives two different ingress ratings, treat this as a general-purpose enclosure rather than a specified-IP66/67 product for a critical outdoor termination — check the rating that matters for your install before adding it to a spec.
Specifications
- IP Rating
- IP65
- Dimensions
- 170 × 120 × 50 mm
- Material
- PVC
- Colour
- Grey
Frequently Asked Questions
What size is this junction box?
170 x 120 x 50mm.
Is it rated for outdoor use?
Yes, the listing describes it as suitable for indoor or outdoor use and states an IP65 rating, though it's also labelled IP55 elsewhere on the page — check which figure you need before specifying it.
What is it made from?
Grey PVC.
Can it be used to join CCTV cable runs?
It's a general-purpose PVC enclosure suited to housing and protecting cable connections, so it can serve as a splice or break-out point on a cable run.
