Product Description
This IP65-rated grey PVC junction box (190x160x70mm) gives installers a waterproof enclosure for routing and protecting cable joints on external CCTV runs. It suits jobs where cabling has to cross from indoors to outdoors — retail shopfronts, warehouse perimeters, office car parks and residential blocks — anywhere a camera run needs a sealed point to break into a distribution board, splice cable, or house a PoE injector out of the weather.
Where it fits in a deployment
On a typical install this box sits mid-run: cable enters from the camera or NVR side, gets joined or terminated, and exits sealed against the elements. Pair it with conduit or trunking rated for the same environment, and route cable glands sized to your cable diameter through the entry points to keep the IP65 rating intact.
Key specs
- Rating: IP65 waterproof
- Material: PVC, adaptable enclosure
- Colour: Grey
- Dimensions: 190 x 160 x 70mm
- Use: Indoor or outdoor
Adaptable enclosures like this are chosen on box volume — check your cable count, connector size and any inline devices fit before ordering, since 190x160x70mm sets a hard limit on what can go inside.
Specifications
- IP Rating
- IP65
- Dimensions
- 190 × 160 × 70 mm
- Material
- PVC
- Colour
- Grey
Frequently Asked Questions
Is this junction box waterproof enough for outdoor use?
Yes, it carries an IP65 waterproof rating, making it suitable for outdoor and indoor installation.
What size is the enclosure?
It measures 190 x 160 x 70mm.
What is the box made from?
It is a PVC adaptable enclosure, finished in grey.
