TV Wall Mount Bracket 26-55 Inch Fixed Mount VESA 400x400

A fixed VESA 400×400 wall bracket for 26-55 inch displays, built for jobs where a monitor or TV needs to sit flat and stay put.

On CCTV and monitoring installs this bracket is typically specified for reception desks, control rooms, retail back-offices and meeting rooms where a display shows camera feeds or signage and doesn't need to tilt or swivel.

Key specs

• Screen range: 26–55 inch flat panel displays (LED, LCD)
• VESA support extends to hole patterns of up to 400 × 400 mm.
• Wall distance: approximately 75 mm, leaving room for cable routing and ventilation
• Construction: steel
• Mount type: fixed — no tilt or swing arm

Selection notes for installers

Confirm the target display's VESA pattern falls within 400 × 400 mm before ordering — this is the hole spacing on the rear of the screen, not the screen size itself. Two displays of the same diagonal size can use different VESA patterns.

Because this is a fixed mount, it suits installs where the screen is viewed straight-on — a monitoring wall or a fixed signage position — rather than where the viewing angle needs adjusting after fitting. The 75 mm wall clearance is enough for most cable glands and connector plugs without pushing the screen far off the wall.

Fit to solid or structural walls suitable for the weight of the display and bracket combined; the steel construction is rated for medium-sized televisions when installed correctly.

This bracket pairs naturally with monitor-based CCTV viewing stations, reception displays and any project where a display needs a permanent, low-profile wall fixing.