Product Description
Physical protection for compact DVR recorders
A lockable steel enclosure that stops unauthorised hands reaching a CCTV DVR once it's installed. Built for sites where the recorder can't simply be hidden — comms cupboards, back offices, retail plant rooms, communal residential risers — but still needs to be accessible to the person who holds the key.
Key specs
- External dimensions: approximately 180mm × 180mm
- Construction: steel body with black protective coating for corrosion resistance
- Access: lockable front panel
- Sizing: designed for compact DVR and small security recorder units, not full-height NVR chassis
Where it fits on a job
On most installs the DVR is the single point of failure — pull it and the recorded evidence goes with it. This box addresses that by giving the recorder its own locked housing, separate from general room security, so cabling, power and network access aren't left open to interference or accidental disconnection.
The front-access panel is the practical detail: an engineer can still reach the DVR for maintenance, configuration changes or cable management without unmounting the whole enclosure, while the unit stays locked the rest of the time.
Checking fit before ordering
Confirm your DVR's footprint against the 180×180mm envelope before specifying this box — it's sized for compact recorders and small units rather than larger multi-bay NVRs, so measure the chassis first if you're working from a spec sheet rather than the unit in hand.
Specifications
- Width
- 18cm
- Height
- 18cm
Technical Specifications
Frequently Asked Questions
What size DVR will fit inside this lock box?
It's built for compact DVR and small security recorder units within an approximate 180mm x 180mm external footprint — check your recorder's dimensions against this before ordering, as larger NVR chassis won't suit.
Can I still access the DVR while it's locked in place?
Yes — the front panel is lockable but allows authorised access for maintenance, configuration and cable management without removing the box from its mounting position.
What is the box made from?
Steel construction with a black protective coating for corrosion resistance, giving rigid physical protection for the recorder inside.
Where would this typically be installed?
Common locations include comms cupboards, equipment rooms and other controlled areas within offices, retail premises, residential blocks and commercial sites where the DVR needs protecting from tampering or theft.
