Product Description
A 9U wall-mounted 19-inch cabinet built to hold the switches, patch panels and NVRs that sit behind a CCTV or data installation. It gives a small comms cupboard or plant room a lockable, ventilated home for active equipment instead of leaving hardware exposed on a shelf.
Where it fits on a job
This size suits offices, retail back-of-house, residential blocks and similar sites where a full-height floor rack is unnecessary but a proper enclosure is still needed for network or CCTV control gear. It's a common pairing with a head-end NVR, PoE switch and patch panel on one structured cabling run.
Key specs
- Rack format: 9U capacity with standard 19-inch mounting, so it fits standard 19-inch rack networking gear.
- External dimensions: 600mm (W) × 450mm (D) × 500mm (H)
- Build: steel construction, black powder-coated finish
- Access: lockable front door restricts unauthorised access while allowing maintenance entry
- Cooling: ventilated panels support passive airflow around active equipment
- Mounting: designed for wall mounting in network or communications areas
Depth and space planning
The 450mm depth leaves room behind patch panels and switches for cable management and for rack devices that need more body depth than a shallow enclosure permits. Worth measuring installed hardware depth against this before ordering, as fit will vary by equipment.
Practical notes
Steel construction and the powder-coated finish are intended to give a durable, professional-looking enclosure suitable for CCTV control equipment environments as well as general network distribution points.
Specifications
- Width
- 60cm
- Depth
- 45cm
- Height
- 50cm
Frequently Asked Questions
What size rack hardware does this cabinet take?
It's built to the standard 19-inch rack format in a 9U height, so it accepts standard 19-inch rack-mounted networking and telecoms equipment.
Is this cabinet suitable for wall mounting only?
The specification describes it as suitable for wall mounting in network or communications areas.
Does the depth give enough room for cable management behind equipment?
At 450mm external depth there is additional space behind installed hardware for cable management and for deeper rack devices, though this depends on the specific equipment fitted.
Can the cabinet be locked to restrict access to equipment?
Yes, it has a lockable front door intended to restrict unauthorised access while still allowing convenient access for maintenance.
