Product Description
Pack of 100 shielded RJ45 Cat6 pass-through connectors, built for structured cabling jobs across retail units, offices, warehouses and residential blocks where network points need terminating on site.
Why pass-through for trade jobs
The pass-through design lets conductors extend through the front of the connector before crimping, so installers can check wire order visually before committing the crimp. That check-before-crimp step cuts wiring errors on multi-point jobs where re-runs cost time.
Key specs
- 8P8C modular plug — standard Ethernet termination format
- Shielded metal housing — added protection against EMI/signal noise
- Cat6 rated — works with both solid and stranded conductors
- Pass-through crimp style — needs a compatible pass-through crimping tool, which trims excess wire during termination
- Pack size: 100pcs — sized for multi-drop installs rather than single patch leads
Where it fits
These connectors suit Ethernet networking runs, CCTV IP camera cabling, and general structured cabling in commercial or residential settings. Because the housing is shielded, it's a reasonable pick where cable runs sit near power lines or other EMI sources.
Before you order
Confirm your crimping tool is the pass-through type — standard RJ45 crimpers won't trim the pass-through tails correctly, and pairing the wrong tool with these connectors is the most common install mistake on site.
Specifications
- Cable Category
- CAT6
- Connector Type
- RJ45
Technical Specifications
Frequently Asked Questions
Do these work with stranded Cat6 cable as well as solid?
Yes, the connector is suitable for both solid and stranded Cat6 conductors.
What tool do I need to terminate these?
A compatible pass-through crimping tool, which trims the excess wire during termination.
What does the pass-through design actually help with?
It lets conductors extend through the front of the connector so you can verify wire order before crimping, reducing wiring errors.
Is this connector shielded?
Yes, it has a shielded metal housing for improved protection against EMI and signal noise.
