Product Description
Timbermate 5.0 x 90mm countersunk wood screws suit general timber and structural fixing work on install jobs where deeper penetration and secure holding are needed. They are steel, countersunk, and rated for medium to heavy duty wood fixing.
Key specs
- Diameter: 5.0mm
- Length: 90mm (3½ inch)
- Head: Countersunk, sits flush with the surface
- Material: Steel
- Suitable for: Timber, chipboard and wood-based materials
Where these fit on site
Installers commonly reach for this size when a job needs more grip than a shorter screw offers — fixing structural timber boards, framing components, or wooden fixtures where the extra length gives better hold in the substrate. The countersunk head means the fixing sits level with the material rather than proud of it, which matters wherever a flush finish is needed or something is fitted over the top afterwards.
Selection notes
Choose this length when the timber or board thickness calls for deeper penetration than a shorter screw would give. For thinner boards or lighter fixings, a shorter screw from the same range may be the better match — check board thickness against screw length before ordering.
Specifications
- Brand
- Timbermate
- Product Type
- Wood screw
- Diameter
- 5.0 mm
- Length
- 90 mm (approximately 3½ inches)
- Material
- Steel
Technical Specifications
Frequently Asked Questions
What head type do these screws have?
Countersunk, so the head sits flush with the surface once fitted.
What materials can these screws be used with?
Timber, chipboard and other wood-based materials.
What size are these screws?
5.0mm diameter by 90mm length, also known as 3½ inch.
What is the screw material?
Steel, for medium to heavy duty wood fixing.
